Call us for your metering needs on 03333 397 997
Liquid
Clamp on Ultrasonic Flow meter, Single or Dual Pipe/Chord, UF811
The UF811 is the fixed clamp-on Flow Meter from Ultraflux. It is a versatile converter, It can be used with Clamp-on or Insertion probes, It is suitable for Liquids in a full pipe. UF811 can handle up to 2 chords on a single pipe or a single chord on 2 pipes. It has an internal logger, Display and USB port. You can also connect PT100's for Calorimeter Calculations.
Clamp on Ultrasonic Flow meter for liquids in ATEX zones, CODminisonic2000
No longer available. The unit has been replaced with the upgraded Minisonic. Product page here UF841
Interface and Pig Detector, Clamp On Ultrasonic , ATEX, CODMinisonic
The Ultraflux CODMinisonic-ISD is a pipeline interface detector. This clamp-on system is used on Oil and Multiproduct lines to give early warnings of product change. This System is suitable for installation in an ATEX zone
Interface and Pig Detector, Clamp On Ultrasonic, ATEX, CODMinisonicPSD
The Ultraflux Minisonic PSD is Sphere and Pig Detector. This is a clamp-on system that will detect each pig and activate a relay as it passes. This system is suitable for installation in an ATEX zone
Micro Orifice Plate 1-12mm bore DF8
The Systec DF8 has been designed for precise flow metering for small pipes and low flows. It comes as a spool piece with 1/2" BSP threads. It is able to measure steam, liquids and gases
Minisonic-600
No longer available. The unit has been replaced with the upgraded Minisonic. Product page here Minisonic
Clamp on Ultrasonic Flow Meter, Single to Quad Chord/Pipe, UF821
The UF821 is the fixed clamp-on flow meter from Ultraflux. It is a versatile converter, It can be used with Clamp-on or Insertion probes, is suitable for Gases or Liquids. Full pipe or Part Full and can handle up to 4 cords on a single pipe or a single cord on 4 pipes. It has an internal logger, Display and USB port. You can also connect PT100's for Calorimeter Calculations.
Clamp on Ultrasonic Flow Meter for liquids, Offshore, EXD, UF841
The EXD UF841 is the fixed clamp-on Flow Meter from Ultraflux. It has been designed for the Offshore Oil and Gas industry. It is a versatile converter that can be used with Clamp-on or Insertion probes. It is suitable for Gases or Liquids. It can be a full pipe up to 4 chords on a single pipe or up to 4 different pipes. It has an internal logger, Display and Optional Outputs. It can also connect PT100's for Calorimeter Calculations if needed.
IFQ Monitor for the Raven-Eye, Phoenix and Beluga A/V
The IFQ Monitor is a display, power supply and output station the Raven-Eye, Beluga and Phoenix flow velocity sensors.
The IFQ Monitor is either mains (115-230VAC) or DC powered (9-28VDC). The IFQ Monitor will power your connected sensors Raven-Eye, Beluga or Pheonix flow velocity sensor and the flow level sensor. The IFQ Monitor is easy to use and configure via the keypad or Fuzion software. The IFQ Monitor displays flow rate, flow level, flow velocity and flow total on the front screen.
The IFQ Monitor has two 4-20mA outputs for Flow and Level and a Modbus RTU over RS485output, it also has system error and flow total relays. its wall mountable and IP65
Open Channel Flow Meter, Doppler, Wetted, Beluga A/V
The Beluga A/V uses Doppler ultrasonic technology to measure the flow velocity and Hydrostatic Pressure to measure your level inside your flow channel. The Beluga A/V is suitable for clean water flow measurements applications.
The Beluga A/V can be combined with an IFQ Monitor to give a local display, 4-20mA and Modbus RTU outputs, and relay error and total signalling. It can also be connected to our web-enabled easyIoTmini loggers, for remote data access and alarms.
The system can also be solar/battery powered and web-enabled easyIoTmini loggers, allowing remote and continuous user free operation.
Flowline also offer remote monitoring of the system, servicing and maintenance packages.