Thermal Mass Gas Flow Meters


Thermal Mass Flow Meter for Air & Gases, Insertion, TA10

The TA10 Insertion Thermal Mass flow sensor for gas flow measurements. The TA10 is typically used on clean, condensate free gases such including Nitrogen, Oxygen, Argon, Carbon Dioxide, Helium and many others. Thermal Mass sensors have great long-term stability, no moving parts and are able to detect very low flow velocities at a high level of accuracy and with large turndown.

Click here to read more

Portable Flow Converter Flowtherm NT2.0 with Insertion Thermal Mass sensor TA10

The FlowthermNT2.0 is a Portable Battery Powered flow converter that can be paired with the TA10 Thermal mass flow sensor for various gases such as compressed air, Nitrogen, Meathan and many others. Small 10mm Diameter insertion sensor for minimal pressure loss. Available in various probe lengths to suit your application needs.

Very Easy to use, internal logger and PC software available.

Click here to read more

Thermal Mass Flow Meter for Air & Gases, Inline, TADi

The TADi is a range of inline thermal mass meters from 8mm ID to 41.8mm that provide a very small measurement uncertainty. They are suitable for clean dry compressed gases such as Air, Nitrogen, Argon and Oxygen. They come complete with Calibration Certificates and can have an optional LCD display. You simply screw them into your line, add power (24VDC) and you will start to get your flow rate delivered via the 4-20mA output.

Click here to read more

Thermal Mass Flow Meter for Gas, Insertion, ATEX TA10/15EXD

Insertion Thermal Mass Meter for flow measurements in ATEX areas. Typically used on clean condensate free gases such as Nitrogen, Oxygen, sludge activation air and engine intake air. Thermal Mass sensors have long-term stability, no moving parts and are able to detect very low flow velocities. It also has high accuracy with large turndown.

Click here to read more

Thermal Mass Flow Meter for Gas, Inline, ATEX, TADI-EXD

The TADi-EXD are a range of inline thermal mass meters from 16mm ID to 41.8mm that provide a very small measurement uncertainty. They are suitable for compressed gases. Complete with Calibration Certificates and an optional LCD display. You simply screw them into your line, add power (24VDC) and you will start to get your flow rate delivered via the 4-20mA output. Suitable for use in ATEX areas. 

Click here to read more