Gas


Air Flow Control System, Deltafit

The Systec DeltaFit is a complete gas flow metering and control package. You simply set what your required flow rate is and the Deltafit will regulate a control flap to maintain your requested flow. It is very accurate and fast responding, with a very low DP even at high flows.

Click here to read more

Direct reading Flow meter, Mechanical, Liquids or Gas, Flo-Gage

RCM Inline Mechanical Direct Reading Flow Meters for liquids, gases or steam. The Flo-Gage is a direct reading DP flow meter that displays your flow rate in a "speedometer" style display.
As your flow increases the needle moves around the face of the display. They do not require any power to function and have large easy to read dials

Click here to read more

Portable Pitot Tube, DF25P

The Systec DF25p is a portable insertion Pitot flow meter idea for stack gas measurements.

Click here to read more

Averaging Pitot Tube, DF25

The Systec DF25 Pitot Tube is an insertion averaging Pitot Tube, perfect for Steam flow measurement. The DF25 can be installed into your existing pipework, or supplied within a flanged spool. The DF25 generates a far lower line restriction compared to many other Differential Pressure methods, thereby saving you money on your steam production. The probe profile provides a very high accuracy. The DF25 Pitot Tube is available for pipes from 80mm to 2500mm. Typical applications are steam flows, Stack Emissions, Boiler Feed Water, Ultra-pure Water and many other applications including high pressure, high-temperature flows.

Click here to read more

Thermal Mass Flow Meter for Air & Gases, Insertion, TA10

The TA10 Insertion Thermal Mass meter is for gas flow measurements. The TA10 is typically used on clean, condensate free gases such as Air, Nitrogen, Oxygen, Argon, Carbon Dioxide, Helium and many others. Thermal Mass sensors have great long-term stability, no moving parts and are able to detect very low flow velocities at a high level of accuracy and with large turndown.

Click here to read more

Vortex Flow Meter for Gas, Insertion, ATEX, VA40 EXD

Insertion Vortex Meter for Flow Measurements in ATEX areas. Typically used on Bio/Land Fill Gas, Nitrogen, Oxygen and Sludge activation air, Engine intake air and Exhaust gases

 Vortex sensors have long-term stability, no moving parts and are resistant to aggressive gases. They still deliver exact measuring results even if the flow contains particles or if condensation forms.

Click here to read more

Vortex Flow Meter for Gas, Inline, ATEX, VADi EXD

Inline Vortex meters for flow high accuracey flow measurement of gas. Vortex sensors have long-term stability, no moving parts and are resistant to aggressive gases. They still deliver exact measuring results even if the flow contains particles or if condensation forms.

Click here to read more

Compressed Air Flow meter, insertion, DFC

The DFC is a low cost insertion compressed air flow meter. It gives a 4-20mA for Flow or Temperature, and 0-10V output either Flow or Pressure. It is a single point insertion pitot for pipes from 2" and above. This is a perfect solution for compressed air lines. It is designed to measure non-explosive, non-corrosive gases.

Click here to read more

Mini Averaging Pitot Tube, DF12

The Systec DF12 is a smaller version of the Systec DF25, suitable for smaller pipes from DN20 to DN100. Perfect for Steam Flows, Stack emissions, boiler feed water, ultra pure water and many other applications.

Click here to read more

Vortex Flow Meter for Gas, Inline, VADI

Inline Vortex meters for flow high accuracey flow measurement of gas. Vortex sensors have long-term stability, no moving parts and are resistant to aggressive gases. They still deliver exact measuring results even if the flow contains particles or if condensation forms.

Click here to read more