Call us for your metering needs on 03333 397 997
Gas
The DF44 is a Large Insertion Averaging Pitot Tube
The Systec DF44 is a larger version of the Systec DF25, suitable for smaller pipes from 250mm to 15000mm. Perfect for stack emissions, ventilation air and many many other applications. From 250mm to 15000mm.
The TA10/15EXD is an Insertion Thermal Mass Flow Meter for Gas in an ATEX zone
Insertion Thermal Mass Meter for flow measurements in ATEX areas. Typically used on clean condensate free gases such as Nitrogen, Oxygen, sludge activation air and engine intake air. Thermal Mass sensors have long-term stability, no moving parts and are able to detect very low flow velocities. It also has high accuracy with large turndown.
The TADi is an Inline Thermal Mass Flow Meter for Air & Gases
The TADi is a range of inline thermal mass meters from 8mm ID to 41.8mm that provide a very small measurement uncertainty. They are suitable for clean dry compressed gases such as Air, Nitrogen, Argon and Oxygen. They come complete with Calibration Certificates and can have an optional LCD display. You simply screw them into your line, add power (24VDC) and you will start to get your flow rate delivered via the 4-20mA output.
The DF8, is an inline Micro Orifice Plate with a 1-12mm bore
The Systec DF8 has been designed for precise flow metering for small pipes and low flows. It comes as a spool piece with 1/2" BSP threads. It is able to measure steam, liquids and gases
The UF841, is a Premium EXD Clamp on Ultrasonic Flow Meter.
The EXD UF841 is the fixed clamp-on Flow Meter from Ultraflux. It has been designed for the Offshore Oil and Gas industry. It is a versatile converter that can be used with Clamp-on or Insertion probes. It is suitable for Gases or Liquids. It can be a full pipe up to 4 chords on a single pipe or up to 4 different pipes. It has an internal logger, Display and Optional Outputs. It can also connect PT100's for Calorimeter Calculations if needed.
The TADI-EXD, is an inline ATEX Mass Flow Meter for Gas.
The TADi-EXD are a range of inline thermal mass meters from 16mm ID to 41.8mm that provide a very small measurement uncertainty. They are suitable for compressed gases. Complete with Calibration Certificates and an optional LCD display. You simply screw them into your line, add power (24VDC) and you will start to get your flow rate delivered via the 4-20mA output. Suitable for use in ATEX areas.
The DFCV, is an Inline Compressed Air Venturi Flow meter.
The DFCV is a low cost, budget insertion compressed air flow meter. It gives a 4-20mA for Flow or Temperature and 0-10V output either Flow or Pressure. It is in line with a threaded connection. This is a perfect solution for compressed airlines.
The Flowtherm NT2.0, is a Portable Flow Converter with Insertion Thermal Mass sensor TA10
The FlowthermNT2.0 is a Portable Battery Powered flow converter that can be paired with the TA10 Thermal mass flow sensor for various gases such as compressed air, Nitrogen, Meathan and many others. Small 10mm Diameter insertion sensor for minimal pressure loss. Available in various probe lengths to suit your application needs.
Very Easy to use, internal logger and PC software available.
The SYS-SMF, an Inline Coriolis Mass Flow Meter
The SYS-SMF from Systec, is a corriolis mass flow meter that is a highly accurate flow meter. It measures and outputs multiply variables simultaneous, these being mass& Volume flow, density and temperature.
The SYS-SMF needs no inlet or outlet straight pipe run and can measure flows in both directions at an measurement error of less than 0.2%.
The SYS-SMF is available in sizes from 15-100mm diameter, with a range of end connections, with a range of high pressure and high temperature and ATEX options Available.