Call us for your metering needs on 03333 397 997
Liquid

The Flo-Gage is an inline Direct reading Mechanical Flow meter
RCM Inline Mechanical Direct Reading Flow Meters for liquids, gases or steam. The Flo-Gage is a direct reading DP flow meter that displays your flow rate in a "speedometer" style display.
As your flow increases the needle moves around the face of the display. They do not require any power to function and have large easy to read dials.

The DF25, an insertion Averaging Pitot Tube for Liquids or Gases
The Systec DF25 Pitot Tube is an insertion averaging Pitot Tube, perfect for Steam flow measurement. The DF25 can be installed into your existing pipework, or supplied within a flanged spool. The DF25 generates a far lower line restriction compared to many other Differential Pressure methods, thereby saving you money on your steam production. The probe profile provides very high accuracy. The DF25 Pitot Tube is available for pipes from 100mm to 2500mm. Typical applications are steam flows, Stack Emissions, Boiler Feed Water, Ultra-pure Water and many other applications including high pressure, high-temperature flows.

The Mag1100F is an Inline Hygienic, Food Grade Flowmeter
The MAG1100F is hygienic Food-grade flowmeter designed for the food and beverage industry. Suitable for conductive liquid flows including Water, Beer, Wort, Dairy, Milk, Cream and many others. The Mag1100F is also widely used in the pharmaceutical industry as it can be steam-sterilization at up to 150°C.Can be supplied with a variety of end connections.

The Mag1100 is an Inline Chemical Flow Meter
Chemical Electromagnetic Flowmeter, MAG 1100 is a electromagnetic flow sensor suitable for chemical applications, it comes with either a Cermaic or PTFE liner for chemical resistance. It is suitable for measuring full pipe flows of electically conductive chemicals. Wafer design, suitable for low flow applications can be suppiled in AC or DC powered versions. Available in sizes 2mm to 100mm, so able to measure very low flow application. 1/2" G threaded addaptors available for smaller sensor

The Mag5100w, Electromagnetic Water Flow Meter
The Mag5100w is an inline Water Flow Meter that uses the electromagnetic principel of measurment. It is designed to meet many water metering application requirements such as, chiller flows, test rigs, cooling flows, groundwater, drinking water, pumped wastewater, sewage & sludge.
MCERT approved and available with optional Modbus/HART/PROFBUS COMs
Clear bore for no pressure loss. Typically less than 0.5% flow rate error. Industrial build quality. Long life and stable meter. Can even be installed underwater.

The NT is a Inline Turbine Flow Meter for Liquids
The high-quality Turbine Flow Meters are perfect for most liquid flow applications. Size range 3/8" to 6", flanged and threaded end fittings. Suitable for liquid fuels, Lubrication Oil, Hydraulic Oils, chemicals and many other liquids.

Mini Averaging Pitot Tube, DF12
The Systec DF12 is a smaller version of the Systec DF25, suitable for smaller pipes from DN20 to DN100. Perfect for Steam Flows, Stack emissions, boiler feed water, ultra-pure water and many other applications.

The DF44 is a Large Insertion Averaging Pitot Tube
The Systec DF44 is a larger version of the Systec DF25, suitable for smaller pipes from 250mm to 15000mm. Perfect for stack emissions, ventilation air and many many other applications. From 250mm to 15000mm.

The BNO is an inline Hygienic Turbine Flow Meter for liquids
High-quality Hygienic Turbine Flow Meters for liquid flow applications. Size range 1" to 3", RJT, ISS, or Tri-Clamp Hygenic fittings. Suitable for oils, Milk, Water and many other liquids. Can be supplied with a basic 4-20mA output only, or a screan with 4-20mA and pulse. Batch controller is also an optional extra

The Raven-Eye, is non-contact in chamber Sewer Flow Meter
The Raven-Eye is a fixed, non-contact Radar flow meter for flow measurements in sewers and open channels. The Raven-Eye is designed for in-chamber non-contact sewer flow monitoring, ideal for retrofitting into your chambers.
The Raven-Eye can be combined with an IFQ Monitor to give a local display of flow rate, flow level and flow total. The IFQ Monitor also has two 4-20mA outputs, two relays for error signalling and totaliser and Modbus RTU.
The Raven-Eye and IFQ Monitor together can be connected to our mydatalog EasyIoTmini, which is an internet logger. This allows continuous user free operation, emailed reports and alarms with full data accessible via the secure web portal www.mydataweb.co.uk
Flowline also offer remote monitoring of the system, servicing and maintenance packages.