Call us for your metering needs on 03333 397 997
Industrial Flow Meters
The DF25, an insertion Averaging Pitot Tube for Liquids or Gases
The Systec DF25 Pitot Tube is an insertion averaging Pitot Tube, perfect for Steam flow measurement. The DF25 can be installed into your existing pipework, or supplied within a flanged spool. The DF25 generates a far lower line restriction compared to many other Differential Pressure methods, thereby saving you money on your steam production. The probe profile provides very high accuracy. The DF25 Pitot Tube is available for pipes from 100mm to 2500mm. Typical applications are steam flows, Stack Emissions, Boiler Feed Water, Ultra-pure Water and many other applications including high pressure, high-temperature flows.
The DFCV, is an Inline Compressed Air Venturi Flow meter.
The DFCV is a low cost, budget insertion compressed air flow meter. It gives a 4-20mA for Flow or Temperature and 0-10V output either Flow or Pressure. It is in line with a threaded connection. This is a perfect solution for compressed airlines.
The SYS-SMF, an Inline Coriolis Mass Flow Meter
The SYS-SMF from Systec, is a corriolis mass flow meter that is a highly accurate flow meter. It measures and outputs multiply variables simultaneous, these being mass& Volume flow, density and temperature.
The SYS-SMF needs no inlet or outlet straight pipe run and can measure flows in both directions at an measurement error of less than 0.2%.
The SYS-SMF is available in sizes from 15-100mm diameter, with a range of end connections, with a range of high pressure and high temperature and ATEX options Available.
The DF8, is an inline Micro Orifice Plate with a 1-12mm bore
The Systec DF8 has been designed for precise flow metering for small pipes and low flows. It comes as a spool piece with 1/2" BSP threads. It is able to measure steam, liquids and gases
Mini Averaging Pitot Tube, DF12
The Systec DF12 is a smaller version of the Systec DF25, suitable for smaller pipes from DN20 to DN100. Perfect for Steam Flows, Stack emissions, boiler feed water, ultra-pure water and many other applications.
The DF44 is a Large Insertion Averaging Pitot Tube
The Systec DF44 is a larger version of the Systec DF25, suitable for smaller pipes from 250mm to 15000mm. Perfect for stack emissions, ventilation air and many many other applications. From 250mm to 15000mm.
The Flo-Gage is an inline Direct reading Mechanical Flow meter
RCM Inline Mechanical Direct Reading Flow Meters for liquids, gases or steam. The Flo-Gage is a direct reading DP flow meter that displays your flow rate in a "speedometer" style display.
As your flow increases the needle moves around the face of the display. They do not require any power to function and have large easy to read dials.
The DFC is an Insertion Compressed Air Flow meter
The DFC is a low-cost insertion compressed air flow meter. It gives a 4-20mA for Flow or Temperature, and 0-10V output either Flow or Pressure. It is a single point insertion pitot for pipes from 2" and above. This is a perfect solution for compressed airlines. It is designed to measure non-explosive, non-corrosive gases.
The DF25P, a Portable Insertion DP Flow Meter
The Systec DF25p is a portable insertion Pitot flow meter idea for stack gas measurements.