|
Performance Specifications
|
|
Accuracy
(linear ranges)
|
MAG 5000 signal converter
|
± 0.5% of rate
|
|
MAG 6000 signal converter
|
± 0.25% of rate
|
|
Operating Specifications
|
|
Fluid types
|
Liquids with an electric conductivity of > 5 µs/cm
|
|
Measurable flow velocities
|
0.125 to 10 m/sec
|
|
Process pressure
|
Up to 16 Bar
|
|
Process temperature limit
|
Up to 70 C
|
|
Ambient temperature limit
|
Remote signal converter
|
-40 to 100 °C
|
|
Integral signal converter
|
-20 to 50 °C
|
|
Liner
|
EPDM
|
|
Electrodes
|
Hastelloy C
|
|
Enclosure
|
IP 67 / 68
|
|
Ex-version
|
ATEX EEx [e] [ib] IIB T3-T6
|
| |
|
|
|
|
|
|
MAGFLO® electromagnetic flow meters offer important advantages such as, no pressure drop, no moving parts, high accuracy, and a wide variety of materials of construction. They have been successfully used in many industries, including food, beverage, chemical, paper & pulp, steel and water treatment. No maintenance, low cost of ownership and high reliability make MAGFLO® the flow meter of choice for many applications.
The SENSORPROM™ located in the terminal box of the signal converter is the concept of the future.
- Installation without calibration—turn on the power and the flowmeter measures flow immediately
- The memory unit calibrates and programs the MAGFLO® flow meter automatically
- Replacing the converter is as easy as changing a light bulb—no rewiring or programming is required
Applications:
- Conductive liquids
- Specialized version available for sanitary food applications
- Highly resistant to a wide range of chemicals
- Increased low flow accuracy for water leak detection
- Drinking water approved version
- Conforms to OIML R49 and ISO 4064
- Operating temperature from -10 to 95 degrees C
- Conforms to EEC directives: PED, LED, EMC
- Available in sizes from DN 2 to DN 2000
Easy to use:
- Backlit alphanumeric display
- Electronic unit and display can be rotated for easy viewing
- Bidirectional flow measurement
High accuracy and repeatability:
- ±0.5% of rate accuracy (MAG 5000 signal converter)
- Optional ±0.25% of rate accuracy available (MAG 6000 signal converter)
- Calibrated on UKAS EN 45001 accredited calibration facilities with a +/- 0.1% uncertainty
Rugged construction:
- No moving parts to wear down or clog
- Simple onsite upgrade to IP 68 of a standard sensor
- Suitable for direct burial and constant flooding
Easy maintenance and installation:
- SENSORPROM™ technology provides automatic download of start-up settings
- Self diagnostics
- Build in length according to ISO 13359
Specification information can be found in the Model MAGFLO General Specification document.
