The CT-Gage is easy to use incoporating:
- Single or two-point calibration option for material and coating, or selection from basic material types.
- Automatic Probe Zero
- Automatic Probe Recognition
- Automatic temperature compensation
- Automatic gain control
- Time corrected gain
A custom calibration configuration for both the material and coating types offers extreme linearity.
The CT-Gage DL includes all of the above features but is also equipped with a data logger. The data logger consists of two file formats: Sequential logging with auto identifiers and an alpha-numeric grid. The file formats are currently compatible with Ultra-Pipe Asset Management Software.
The CT-Gage DL can store 16,000+ readings, with B-Scan captures, recording all the gauge's settings and features, or turn the graphics mode off and store of 210,000 readings!
.jpg)
- Time based B-Scan for cross section material scans
- Stores up to 64 custom set-ups for specific applications
- Audible/visual alarms with hi and low limit settings
- Display update rate of 25 times per second
- PC software included
- 2 year warranty
MEASUREMENT MODES:
- Coating Off: Pulse-Echo (P-E)
- Coating On: Pulse-Echo Coating (PECT)
- Temp Comp: Pulse-Echo Temperature Compensation (PETP)
- Thru-Paint: Echo-Echo (E-E)
- Coating Only: Coating (CT)
Pulser: Dual square wave pulsers.
Receiver: Dual receivers - manual or ACG gain control with 110dB range (limited).
Timing: Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.
MEASURING RANGE:
- Pulse-Echo Mode (P-E) - (Pit & Flaw Detection), measures from 0.63 - 508 mm (0.025 - 19.999 ins)
- Pulse-Echo Coating Mode (PECT) - (Material, Coating, Pit & Flaw Detection), Material: 0.63 - 508 mm (0.025 - 19.999 ins), Coating: 0.01 - 2.54 mm (0.001 - 0.100 ins)
- Pulse-Echo Temp Comp Mode (PETP) - (Pit & Flaw Detection), Auto temperature compensation, measures: 0.63 - 508 mm (0.025 - 19.999 ins).
- Echo-Echo Mode (E-E) - (Thru paint and coatings), Measures from 2.54 - 102 mm (0.100 - 4.0 ins)
- Coating Only Mode (CT) - (Coating Thickness), Measures from 0.0127 - 2.54 mm (0.0005 - 0.100 ins), Range will vary +/- depending on the coating.
- Resolution: +/- 0.01 mm (0.001 inches)
- Velocity Range: 1250 to 13995 metres/sec, 0.0492 to 0.5510 ins/ms
- Single or two point calibration option for material and coating, or selection of basic material types.
- Units: English or Metric
Size: 63.5 x 165 x 31.5mm, 2.5 x 6.5 x 1.24 inches (WxHxD)
Weight: 382.72 gms (13.5 ounces) with batteries.
Keyboard: Membrane switch pad with twelve tactile keys.
Operating Temperature: -10°C to 60°C
Data Output: Bi-directional RS232 serial port. Windows PC interface software.
Display: 1/8 in BGA grayscale display (240 x 160 pixels). Viewable area 62 x 45.7mm (2.4 x 1.8 ins). EL backlit (on/off/auto).
POWER SOURCE
Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline. Autopower off if idle for 5 minutes. Battery Status icon.
DISPLAY
Large Digits: Standard thickness view. Digit height 17.78mm (0.700 ins)
B-Scan: Time based cross section view. Display speed of 15 secs per screen.
Scan Bar Thickness: 6 readings per second. Viewable in B-Scan and Large Digits views.
Repeatability Bar Graph: Indicates stability of reading.
Features Status Bar: Indicates features currently active.
TRANSDUCER
Transducer Types: General purpose 5MHz 1/4" (6mm), with integral 4 foot cable. Custom transducers (1MHz to 10MHz frequency range) and cables available for special applications.
DATA LOGGER (CT-DL)
Log Formats: Grid (alpha-numeric), Sequential (auto-identifier)
Graphics On: 16,000 readings, B-Scan image and gauge settings for every reading.
Graphics Off: 210,000 readings (coating, material, min & max) OBSTRUCT to indicate inaccessible locations.
CERTIFICATION: Factory calibration traceable to national standards.
WARRANTY: 2 year limited.
